Waste management (New York, N.Y.) · 2023
Sorption and diffusion of per-polyfluoroalkyl substances (PFAS) in high-density polyethylene geomembranes.
СтатьяНазвание и аннотация: Перевод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Ahmad Aamir, Tian Kuo, Tanyu Burak, Foster Gregory D
Аннотация
The objective of this study is to investigate the fate and transport of per-polyfluoroalkyl substances (PFAS) through a high-density polyethylene (HDPE) geomembrane (GM) that is commonly used in landfill composite liner systems. Tests were conducted to measure the sorption and diffusion of per-polyfluoroalkyl substances (PFAS) with varying number of carbons in chain and functional groups on HDPE GM. Perfluoroalkyl carboxyl acids (PFCAs), perfluoroalkyl sulphonic acids (PFSAs), alkyl-sulfonamidoacetic acids (FOSAAs), fluorotelomer sulfonic acids (FtSAs), alkane sulfonamides (FOSA) and ether carboxylic acids (Gen X) were investigated in this study. The partition coefficients (Kd) on HDPE GM ranged from 3.8 to 98.3 L/kg. PFAS with amide and sulfonic functional groups showed stronger sorption than that of PFAS with carboxylic acid functional groups. Molecular weight directly affected the Kd for long-chained PFAS whereas the Kd of short-chained PFAS was not sensitive to molecular weight. The diffusion coefficients (Dg) of PFCAs and PFSAs through 0.1-mm HDPE GM were found to be in the orders of 10-18 to 10-17 m2/s. The Dg decreased with increasing molar mass and were also observed to be dependent on the functional group. Dg of PFSAs was lower than that of PFCAs for similar number of carbons in the chain. The estimated mass flux for PFAS in an intact 1.5-mm HDPE GM varied from 38.7 to 2080.8 ng/m2/year whereas the estimated diffusive breakthrough time for PFAS in intact 1.5-mm HDPE was 1526 years or longer.