MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1097/bot.0b013e31819df8c9

Медицинская библиотека · Journal of orthopaedic trauma · 2009

Optimal screw orientation for fixation of coronoid fractures.

Moon Jun-Gyu, Zobitz Mark E, An Kai-Nan, O'Driscoll Shawn W

СтатьяПеревод в очереди

Аннотация

OBJECTIVE

The aim of this study was to compare the fixation stability of coronoid fractures achieved by a screw inserted in the anteroposterior (AP) direction with that achieved by a screw inserted in the posteroanterior (PA) direction.

METHODS

Eleven pairs of fresh-frozen cadaveric ulna were used. A coronoid fracture was simulated by transverse osteotomy at the midpoint of coronoid height. The specimens of a pair were then randomized to be fixed with an AP screw in one specimen and a PA screw in the other. Insertion torque, load to failure, and stiffness were measured under axial load with a material testing machine.

RESULTS

PA screw placement yielded greater strength and stiffness of fixation than did AP placement. The mean load to failure was 184 N in the PA screw group and 131 N in the AP screw group (P < 0.05). The mean stiffness was 106 N/mm with PA screws and 76 N/mm with AP screws (P < 0.05). These differences were statistically significant despite the fact that the screw insertion torques was similar in PA screw (0.27 Nm) and AP screw (0.25 Nm) (P = 0.2).

CONCLUSIONS

PA screw placement was biomechanically superior to AP screw placement. Together with the fact that it is clinically easier to insert and remove screw from the posterior ulna, these data indicate that optimal screw orientation for fixation of coronoid tip fracture is posterior to anterior direction.

Для цитирования: Moon Jun-Gyu, Zobitz Mark E, An Kai-Nan, O'Driscoll Shawn W. Optimal screw orientation for fixation of coronoid fractures.. Journal of orthopaedic trauma. 2009. DOI: 10.1097/bot.0b013e31819df8c9.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.