MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.jhazmat.2020.124548

Медицинская библиотека · Journal of hazardous materials · 2020

Enhancement of UV disinfection of urine matrixes by electrochemical oxidation.

Herraiz-Carboné Miguel, Cotillas Salvador, Lacasa Engracia, Cañizares Pablo, Rodrigo Manuel A, Sáez Cristina

СтатьяПоддержка исследования: вне правительства СШАПеревод в очереди

Аннотация

This work focuses on the removal of antibiotic-resistant bacteria (ARB) contained in hospital urines by UV disinfection enhanced by electrochemical oxidation to overcome the limitations of both single processes in the disinfection of this type of effluents. UV disinfection, electrolysis, and photoelectrolysis of synthetic hospital urine intensified with K. pneumoniae were studied. The influence of the current density and the anode material was assessed on the disinfection performance of combined processes and the resulting synergies and/or antagonisms of coupling both technologies were also evaluated. Results show that the population of bacteria contained in hospital urine is only reduced by 3 orders of magnitude during UV disinfection. Electrolysis leads to complete disinfection of hospital urine when working at 50 A m-2 using Boron Doped Diamond (BDD) and Mixed Metal Oxides (MMO) as anodes. The coupling of electrolysis to the UV disinfection process leads to the highest disinfection rates, attaining a complete removal of ARB for all the current densities and anode materials tested. The use of MMO anodes leads to higher synergies than BDD electrodes. Results confirm that UV disinfection can be enhanced by electrolysis for the removal of ARB in urine, considering both technical and economic aspects.

Для цитирования: Herraiz-Carboné Miguel, Cotillas Salvador, Lacasa Engracia, Cañizares Pablo, Rodrigo Manuel A, Sáez Cristina. Enhancement of UV disinfection of urine matrixes by electrochemical oxidation.. Journal of hazardous materials. 2020. DOI: 10.1016/j.jhazmat.2020.124548.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.