Journal of environmental management · 2022
Synthesis of nZnO from waste batteries by hydrometallurgical method for photocatalytic degradation of organic pollutants under visible light irradiation.
СтатьяНазвание и аннотация: Перевод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Rawat Shalu, Singh Jiwan
Аннотация
Waste zinc carbon (Zn-C) batteries are generated worldwide in a large amount. They are non-rechargeable and costly to recycle. Therefore, they end up in the landfills where they create hazards for humans and for environment as well. Zn-C batteries are rich in concentration of different heavy metals so they can be subjected for the recovery of metals for the development of valuable new materials. In this study authors have proposed an easy hydrometallurgical method for the recovery of zinc from waste Zn-C batteries to synthesize nano zinc oxide (nZnO) photocatalyst. The prepared nZnO particles were irregular in shape, highly crystalline in nature with crystallite size 23.94 nm. The band gap of the photocatalyst was 3.1 eV. The photocatalytic activity of the synthesised nZnO was tested for the degradation of three organic pollutants namely; phenol, p-nitrophenol (PNP) and crystal violet dye (CV) in an aqueous solution under visible light irradiation. nZnO showed a good catalytic efficiency for the degradation of all the three pollutants, however, the crystal violet (CV) removal was best in comparison with the other pollutants, it was minimally effected by the increase in CV concentration. The maximum degradation of phenol, PNP and CV was found to be 95.03 ± 0.2%, 88.63 ± 0.1% and 97.87 ± 0.4%, respectively. The degradation data was fitted best with pseudo-first-order kinetic model. The photocatalyst was recyclable and its regeneration ability was higher for initial three cycles. The intermediate compounds formed in the process of degradation were determined by liquid chromatography and mass spectroscopy (LC-MS) analysis.