MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.watres.2015.02.050

Медицинская библиотека · Water research · 2015

Characteristics of pollutant gas releases from swine, dairy, beef, and layer manure, and municipal wastewater.

Dai Xiao-Rong, Saha Chayan Kumer, Ni Ji-Qin, Heber Albert J, Blanes-Vidal Victoria, Dunn James L

СтатьяПоддержка исследования: вне правительства СШАПеревод в очереди

Аннотация

Knowledge about characteristics of gas releases from various types of organic wastes can assist in developing gas pollution reduction technologies and establishing environmental regulations. Five different organic wastes, i.e., four types of animal manure (swine, beef, dairy, and layer hen) and municipal wastewater, were studied for their characteristics of ammonia (NH3), carbon dioxide (CO2), hydrogen sulfide (H2S), and sulfur dioxide (SO2) releases for 38 or 43 days in reactors under laboratory conditions. Weekly waste additions and continuous reactor headspace ventilation were supplied to simulate waste storage conditions. Results demonstrated that among the five waste types, layer hen manure and municipal wastewater had the highest and lowest NH3 release potentials, respectively. Layer manure had the highest and dairy manure had the lowest CO2 release potentials. Dairy manure and layer manure had the highest and lowest H2S release potentials, respectively. Beef manure and layer manure had the highest and lowest SO2 releases, respectively. The physicochemical characteristics of the different types of wastes, especially the total nitrogen, total ammoniacal nitrogen, dry matter, and pH, had strong influence on the releases of the four gases. Even for the same type of waste, the variation in physicochemical characteristics affected the gas releases remarkably.

Для цитирования: Dai Xiao-Rong, Saha Chayan Kumer, Ni Ji-Qin, Heber Albert J, Blanes-Vidal Victoria, Dunn James L. Characteristics of pollutant gas releases from swine, dairy, beef, and layer manure, and municipal wastewater.. Water research. 2015. DOI: 10.1016/j.watres.2015.02.050.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.