MedElevator Войти в исследования
← Поиск публикаций

DOI 10.3390/polym14081562

Медицинская библиотека · Polymers · 2022

Synthesis and Characterization of Cyclodextrin-Based Polyhemiaminal Composites with Enhanced Thermal Stability.

Jabedul Hoque Mohammed, Toda Mitsuo, Mase Nobuyuki

СтатьяПеревод в очереди

Аннотация

Polyhemiaminal (PHA) polymers are a new class of thermosetting polymers that have recently gained attention owing to their high mechanical strength and excellent recycling behavior. However, low thermal stability is a common issue in PHA polymers due to the thermally labile crosslinked knots. Herein, crosslinked PHA polymer composites were synthesized by reacting formaldehyde with a precursor solution of 4,4'-oxydianiline (ODA) and cyclodextrins (CDs) (α-, β-, and γ-). The material obtained under optimal conditions (ODA:CD molar ratio of 1:0.5, 37% aqueous solution of formaldehyde (formalin)) exhibited good film formability and high thermal stability with two characteristic decomposition phenomena and a high char yield. The early decomposition of CDs and char formation led to high thermal stability. Time-resolved NMR analysis was conducted to study hemiaminal bond formation via a condensation reaction between ODA and formaldehyde. Furthermore, PHA matrix formation was confirmed by the dissolution of the deposited CD layer in a solution of N-methyl-2-pyrrolidinone containing 8-9 wt.% LiBr at 80 °C and FTIR analysis. Based on the elemental analysis results, PHA network formation was confirmed by considering a single unit of the PHA network with CD composition, including the solvent and water.

Для цитирования: Jabedul Hoque Mohammed, Toda Mitsuo, Mase Nobuyuki. Synthesis and Characterization of Cyclodextrin-Based Polyhemiaminal Composites with Enhanced Thermal Stability.. Polymers. 2022. DOI: 10.3390/polym14081562.
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.