MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.watres.2024.121221

Медицинская библиотека · Water research · 2024

Inhibition of pyrite oxidation through forming biogenic K-jarosite coatings to prevent acid mine drainage production.

Hong Maoxin, Wang Jun, Yang Baojun, Liu Yang, Sun Xin, Li Laishun, Yu Shichao, Liu Shitong, Kang Yang, Wang Wei, Qiu Guanzhou

СтатьяПеревод в очереди

Аннотация

This study proposes a novel method by forming biogenic K-jarosite coatings on pyrite surfaces driven by Acidithiobacillus ferrooxidans (A. ferrooxidans) to reduce heavy metal release and prevent acid mine drainage (AMD) production. Different thicknesses of K-jarosite coatings (0.7 to 1.1 μm) were able to form on pyrite surfaces in the presence of A. ferrooxidans, which positively correlated with the initial addition of Fe2+ and K+ concentrations. The inhibiting effect of K-jarosite coatings on pyrite oxidation was studied by electrochemical measurements, chemical oxidation tests, and bio-oxidation tests. The experimental results showed that the best passivation performance was achieved when 20 mM Fe2+ and 6.7 mM K+ were initially introduced with a bacterial concentration of 4 × 108 cells·mL-1, reducing chemical and biological oxidation by 70 % and 98 %, respectively (based on the concentration of total iron dissolved into the solution by pyrite oxidation). Similarly, bio-oxidation tests of two mine waste samples also showed sound inhibition effects, which offers a preliminary demonstration of the potential applicability of this method to actual waste rock. This study presents a new perspective on passivating the oxidation of metal sulfide tailings or waste and preventing AMD.

Для цитирования: Hong Maoxin, Wang Jun, Yang Baojun, Liu Yang, Sun Xin, Li Laishun, Yu Shichao, Liu Shitong, Kang Yang, Wang Wei, Qiu Guanzhou. Inhibition of pyrite oxidation through forming biogenic K-jarosite coatings to prevent acid mine drainage production.. Water research. 2024. DOI: 10.1016/j.watres.2024.121221.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.