MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1007/s10653-019-00312-8

Медицинская библиотека · Environmental geochemistry and health · 2019

Ultra-sonication for controlling the formation of disinfection by-products in the ClO2 pre-oxidation of water containing high concentrations of algae.

Chen Jiaxin, Li Ji, Zhang Xiaolei, Wu Zhaoyang, Tyagi R D

СтатьяПеревод в очереди

Аннотация

Eutrophication has become great concern in recent years due to the fact that rivers, lakes, and reservoirs are the main drinking water source. Studies have been performed to enhance the removal of algae with ClO2 pre-oxidation, but there was high potential in the formation of chlorite and chlorate. In this study, ultra-sonication was employed to assist algae removal and control disinfection by-products formation in ClO2 pre-oxidation processes. It was found that solo ultra-sonication for 10 min (algae removal 86.11 ± 2.16%) could achieve similar algae removal efficiency as that with solo ClO2 (0.5 mg/L) pre-oxidation for 10 min (algae removal 87.10 ± 3.50%). In addition, no formations of chlorite and chlorate were detected in solo ultra-sonication process. Five-minutes ultra-sonication followed by 5-min 0.5 mg/L ClO2 treatment (total treatment time 10 min; algae removal 93.55 ± 3.22%) provided a better performance on algae removal compared to the solo ClO2 (0.5 mg/L) pre-oxidation for 10 min. Moreover, chlorite was undetectable. It suggests that the utilization of ultra-sonication in ClO2 pretreatment for algae removal has highly prevented the formations of chlorite and chlorate.

Для цитирования: Chen Jiaxin, Li Ji, Zhang Xiaolei, Wu Zhaoyang, Tyagi R D. Ultra-sonication for controlling the formation of disinfection by-products in the ClO2 pre-oxidation of water containing high concentrations of algae.. Environmental geochemistry and health. 2019. DOI: 10.1007/s10653-019-00312-8.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.