MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/s1001-0742(12)60331-3

Медицинская библиотека · Journal of environmental sciences (China) · 2013

Fe2O3 particles as superior catalysts for low temperature selective catalytic reduction of NO with NH3.

Wang Xiaobo, Gui Keting

Оценочное исследованиеСтатьяПоддержка исследования: вне правительства СШАПеревод в очереди

Аннотация

Fe2O3 particle catalysts were experimentally studied in the low temperature selective catalytic reduction (SCR) of NO with NH3. The effects of reaction temperature, oxygen concentration, [NH3]/[NO] molar ratio and residence time on SCR activity were studied. It was found that Fe2O3 catalysts had high activity for the SCR of NO with NH3 in a broad temperature range of 150-270 degrees C, and more than 95% NO conversion was obtained at 180 degrees C when the molar ratio [NH3]/[NO] = 1, the residence time was 0.48 seconds and O2 volume fraction was 3%. In addition, the effect of SO2 on SCR catalytic activity was also investigated at the temperature of 180 degrees C. The results showed that deactivation of the Fe2O3 particles occurred due to the presence of SO2 and the NO conversion decreased from 99.2% to 58% in 240 min, since SO2 gradually decreased the catalytic activity of the catalysts. In addition, X-ray diffraction, Thermogravimetric analysis and Fourier transform infrared spectroscopy were used to characterize the fresh and deactivated Fe2O3 catalysts. The results showed that the deactivation caused by SO2 was due to the formation of metal sulfates and ammonium sulfates on the catalyst surface during the de-NO reaction, which could cause pore plugging and result in suppression of the catalytic activity.

Для цитирования: Wang Xiaobo, Gui Keting. Fe2O3 particles as superior catalysts for low temperature selective catalytic reduction of NO with NH3.. Journal of environmental sciences (China). 2013. DOI: 10.1016/s1001-0742(12)60331-3.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.