Dental and medical problems · 2021
Effect of dental implant angulation on the dimensional accuracy of master casts.
СтатьяНазвание и аннотация: Перевод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Barjini Negar, Sayahpour Sahar, Jafari Maryam
Аннотация
BACKGROUND: Making accurate impressions of dental implants and transferring their three-dimensional (3D) position to master casts is critical for the passive fit of prosthetic frameworks.
OBJECTIVES: This study aimed to assess the effect of dental implant angulation on the dimensional accuracy of master casts.
MATERIAL AND METHODS: An acrylic model with 2 external hexagonal implants was used in this in vitro experimental study. The impressions of the model were made in 42 positions, with different angulation of the 2 implants, ranging from +15° to -15°, by means of the open-tray and closed-tray impression techniques, using a polyvinyl siloxane impression material. The spatial coordinates of the implants were measured on the X, Y and Z axes. The dimensional accuracy of the impressions made at different positions (parallel, convergent and divergent) and different angulation of the implants were determined. The data was analyzed using the one-way analysis of variance (ANOVA), Student's t test and Tukey's test.
RESULTS: Casts with the lowest accuracy were obtained when the 2 implants were divergent by 25° (R = 1.1336). However, the position of the 2 implants had no significant effect on the dimensional accuracy of the master casts. The error rate was 0.4181 in the open-tray technique and 0.5095 in the closed-tray technique, with no significant difference between them (p > 0.05). The angulation of the 2 implants had a significant effect on the dimensional accuracy of the master casts (p = 0.0001).
CONCLUSIONS: Considering the significant effect of implant angulation in the range from +15° to -15° relative to the longitudinal axis on the dimensional accuracy of master casts, further studies are required to reach a final conclusion in this respect.
OBJECTIVES: This study aimed to assess the effect of dental implant angulation on the dimensional accuracy of master casts.
MATERIAL AND METHODS: An acrylic model with 2 external hexagonal implants was used in this in vitro experimental study. The impressions of the model were made in 42 positions, with different angulation of the 2 implants, ranging from +15° to -15°, by means of the open-tray and closed-tray impression techniques, using a polyvinyl siloxane impression material. The spatial coordinates of the implants were measured on the X, Y and Z axes. The dimensional accuracy of the impressions made at different positions (parallel, convergent and divergent) and different angulation of the implants were determined. The data was analyzed using the one-way analysis of variance (ANOVA), Student's t test and Tukey's test.
RESULTS: Casts with the lowest accuracy were obtained when the 2 implants were divergent by 25° (R = 1.1336). However, the position of the 2 implants had no significant effect on the dimensional accuracy of the master casts. The error rate was 0.4181 in the open-tray technique and 0.5095 in the closed-tray technique, with no significant difference between them (p > 0.05). The angulation of the 2 implants had a significant effect on the dimensional accuracy of the master casts (p = 0.0001).
CONCLUSIONS: Considering the significant effect of implant angulation in the range from +15° to -15° relative to the longitudinal axis on the dimensional accuracy of master casts, further studies are required to reach a final conclusion in this respect.