Fluorescence Sensing of Formaldehyde and Acetaldehyde Based on Responsive Inverse Opal Photonic Crystals: A Multiple-Application Detection Platform.

Formaldehyde (FA) and acetaldehyde (AcH) used as common chemicals in many fields are carcinogenic. The presently reported detection methods usually need expensive instruments, professional technicians, and time-consuming processes, and the detection sensitivity still needs further improvement. Herein, we report a highly effective fluorescence (FL) sensing film for FA and AcH based on naphthalimide derivative-infiltrated responsive SiO2 inverse opal photonic crystals (PCs), establishing a practically multiple-application detection platform for FA and AcH in air, aquatic products, and living cells. Nucleophilic addition products between the amine group of the naphthalimide derivative and aldehydes emit strong FL at ∼550 nm, realizing selective FL detection for FA and AcH. The emitted FL can be enhanced remarkably because of the slow photon effect of PCs, in which the FL wavelength is located at the stopband edge of PCs. A highly sensitive detection for FA and AcH with limits of detection of 10.6 and 7.3 nM, respectively, is achieved, increasing 3 orders of magnitude compared with that in the solution system. Additionally, the interconnected three-dimensional microporous inverse opal structure endows the sensor with a rapid response within 1 min. Furthermore, the as-prepared PC sensor can be reused by simple washing in an acidic aqueous solution. The sensing system can be used as a FL multi-detection platform for FA and AcH in air, aqueous solution, and living cells. This FL sensing approach based on small organic molecule-functionalized PCs is universally available to develop various sensors for target analytes by designing new functional organic compounds.