MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1093/bja/86.3.345

Медицинская библиотека · British journal of anaesthesia · 2001

Compound A production from sevoflurane is not less when KOH-free absorbent is used in a closed-circuit lung model system.

Versichelen L, Bouche M P, Struys M, Van Bocxlaer J, Mortier E, de Leenheer A P, Rolly G

СтатьяПеревод в очереди

Аннотация

In an in vitro study, less compound A was formed when a KOH-free carbon dioxide absorbent was used. To confirm this observation we used a lung model in which carbon dioxide was fed in at 160 ml min(-1) and sampling gas was taken out for analysis at 200 ml min(-1); ventilation aimed for a PE'CO2 of 5.4 kPa. The soda lime canister temperatures in the inflow and outflow ports (Tin and Tout) were recorded. In six runs of 240 min each, a standard soda lime, Sodasorb (Grace, Epernon, France) was used and in eight runs KOH-free Sofnolime (Molecular Products, Thaxted, UK) was used. Liquid sevoflurane was injected using a syringe pump to obtain 2.1% E'. Compound A was measured by capillary gas chromatography combined with mass spectrometry. Median (range) compound Ainsp increased to a maximum of 22.7 (7.9) ppm for Sodasorb and 33.1 (20) for Sofnolime at 60 min and decreased thereafter; the difference between groups was significant (P<0.05) at each time of analysis up to 240 min. The canister temperatures were similar in both groups and increased to approximately 40 degrees C at 240 min. Contrary to expectation, compound A concentrations were greater with the KOH-free absorbent despite similar canister temperatures with both absorbents.

Для цитирования: Versichelen L, Bouche M P, Struys M, Van Bocxlaer J, Mortier E, de Leenheer A P, Rolly G. Compound A production from sevoflurane is not less when KOH-free absorbent is used in a closed-circuit lung model system.. British journal of anaesthesia. 2001. DOI: 10.1093/bja/86.3.345.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.