Multivariate optimization of methylene blue dye degradation using electro-Fenton process with self-doped TiO2 nanotube anode.

This paper reports the optimization of the electro-Fenton (EF) process using different anode materials for the degradation of Methylene Blue (MB) dye as a model compound. The cathode used was an air-diffusion PTFE, while three different anode materials (Pt, DSA, and self-doped TiO2 nanotubes - SD-TNT) were tested individually. A full factorial design (FFD) with a central point combined with response surface methodology (RSM) was employed to optimize the experimental variables, including solution pH, applied current, and anode material. The optimized EF conditions involved a pH of 4.0, a current of 100 mA, and an SD-TNT anode for 120 min of electrolysis. Under these conditions, the MB solution achieved complete decolorization and 45% of total organic carbon (TOC) removal after 120 min of EF treatment. The findings indicate that the hydroxyl radical (•OH) plays a crucial role as the primary oxidizing agent in the EF process. The decay of MB followed pseudo-first-order kinetics, reflecting a consistent formation of •OH radicals that effectively attacked the MB dye and its subproducts during mineralization. Moreover, the EF process exhibited superior performance in terms of energy consumption (EC) and mineralization current efficiency (ECM) in the initial treatment stages, while the presence of recalcitrant by-products and loss of anode self-doping impacted performance in the later stages. The optimized EF conditions and the understanding gained from this study contribute to the advancement of sustainable wastewater treatment strategies for the removal of organic dyes.