Production of biodiesel via esterification of coffee waste-derived bio-oil using sulfonated catalysts.

Catalytic esterification of acid-rich coffee waste-derived bio-oil was performed using sulfonated metal oxide catalysts (Al2O3, MgO, ZrO2, and TiO2) and ethanol to produce fatty acid alkyl esters. The potential of the sulfonated catalysts for esterification decreased in the following order: Ti-SO4 > Zr-SO4 > Al-SO4 > Mg-SO4. Particularly, Ti-SO4 and Zr-SO4 resulted in 91.2 % (peak area %) and 85.2 % esters, respectively. This is attributed to the contributions of well-dispersed Brønsted acid sites created by -SO3H functional groups, additional Lewis acid sites formed by Ti and Zr oxides, and their appropriate pore size. Compared with HCl and H3PO4, the use of H2SO4 for TiO2 treatment significantly enhanced ester formation. When using Ti-SO4, increasing the catalyst-to-feedstock ratio (1/2 ∼ 1/10) significantly increased the esters' selectivity (38.7 %∼94.7 %). Ethanol utilization caused a superior selectivity for esters than methanol, while the increasing temperature favored ester production. This study proposes an eco-friendly and practical method for biodiesel generation.