MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.jhazmat.2011.08.048

Медицинская библиотека · Journal of hazardous materials · 2011

Chelating agent free-solid phase extraction (CAF-SPE) of Co(II), Cu(II) and Cd(II) by new nano hybrid material (ZrO2/B2O3).

Yalçinkaya Ozcan, Kalfa Orhan Murat, Türker Ali Rehber

СтатьяПоддержка исследования: вне правительства СШАПеревод в очереди

Аннотация

New nano hybrid material (ZrO(2)/B(2)O(3)) was synthesized and applied as a sorbent for the separation and/or preconcentration of Co(II), Cu(II) and Cd(II) in water and tea leaves prior to their determination by flame atomic absorption spectrometry. Synthesized nano material was characterized by scanning electron microscope, transmission electron microscope and X-ray diffraction. The optimum conditions for the quantitative recovery of the analytes, including pH, eluent type and volume, flow rate of sample solution were examined. The effect of interfering ions was also investigated. Under the optimum conditions, adsorption isotherms and adsorption capacities have been examined. The recoveries of Co(II), Cu(II) and Cd(II) were 96 ± 3%, 95 ± 3%, 98 ± 4% at 95% confidence level, respectively. The analytical detection limits for Co(II), Cu(II), and Cd(II) were 3.8, 3.3, and 3.1 μg L(-1), respectively. The reusability and adsorption capacities (32.2 mg g(-1) for Co, 46.5 mg g(-1) for Cu and 109.9 mg g(-1) for Cd) of the sorbent were found as satisfactory. The accuracy of the method was confirmed by analyzing certified reference material (GBW-07605 Tea leaves) and spiked real samples. The method was applied for the determination of analytes in tap water and tea leaves.

Для цитирования: Yalçinkaya Ozcan, Kalfa Orhan Murat, Türker Ali Rehber. Chelating agent free-solid phase extraction (CAF-SPE) of Co(II), Cu(II) and Cd(II) by new nano hybrid material (ZrO2/B2O3).. Journal of hazardous materials. 2011. DOI: 10.1016/j.jhazmat.2011.08.048.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.