MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1038/s41598-024-59018-2

Медицинская библиотека · Scientific reports · 2024

MoO3/WO3/rGO as electrode material for supercapacitor and catalyst for methanol and ethanol electrooxidation.

Askari Mohammad Bagher, Salarizadeh Parisa, Ramezan Zadeh Mohammad Hassan

СтатьяПеревод в очереди

Аннотация

The potential of metal oxides in electrochemical energy storage encouraged our research team to synthesize molybdenum oxide/tungsten oxide nanocomposites (MoO3/WO3) and their hybrid with reduced graphene oxide (rGO), in the form of MoO3/WO3/rGO as a substrate with relatively good electrical conductivity and suitable electrochemical active surface. In this context, we presented the electrochemical behavior of these nanocomposites as an electrode for supercapacitors and as a catalyst in the oxidation process of methanol/ethanol. Our engineered samples were characterized by X-ray diffraction pattern and scanning electron microscopy. As a result, MoO3/WO3 and MoO3/WO3/rGO indicated specific capacitances of 452 and 583 F/g and stability of 88.9% and 92.6% after 2000 consecutive GCD cycles, respectively. Also, MoO3/WO3 and MoO3/WO3/rGO nanocatalysts showed oxidation current densities of 117 and 170 mA/cm2 at scan rate of 50 mV/s, and stability of 71 and 89%, respectively in chronoamperometry analysis, in the MOR process. Interestingly, in the ethanol oxidation process, corresponding oxidation current densities of 42 and 106 mA/cm2 and stability values of 70 and 82% were achieved. MoO3/WO3 and MoO3/WO3/rGO can be attractive options paving the way for prospective alcohol-based fuel cells.

Для цитирования: Askari Mohammad Bagher, Salarizadeh Parisa, Ramezan Zadeh Mohammad Hassan. MoO3/WO3/rGO as electrode material for supercapacitor and catalyst for methanol and ethanol electrooxidation.. Scientific reports. 2024. DOI: 10.1038/s41598-024-59018-2.
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.