Enhancing the permeability and antifouling properties of cellulose acetate ultrafiltration membrane by incorporation of ZnO@graphitic carbon nitride nanocomposite.

This study reports the modification of cellulose acetate (CA) membrane with zinc oxide (ZnO)@graphitic carbon nitride (g-C3N4) nanocomposite to improve the antifouling and separation performance. Different combinations of the CA-based membranes such as CA/g-C3N4, CA/ZnO, and CA/ZnO@g-C3N4 were fabricated using the non-solvent induced phase separation (NIPS) method. Membranes were analyzed for their morphology (SEM), porosity, pore size, contact angle, permeability, rejection, and antifouling properties. According to the SEM images of CA/ZnO@g-C3N4, the formation of pear-shaped macro voids and finger-like canals originating from the top layer was evident. Nanocomposite blended membrane with 0.25 wt.% ZnO@g-C3N4 achieved the largest pore radius (3.05 nm) and the lowest contact angle (67.7°). With these characteristics, 0.25 wt.% ZnO@g-C3N4 membrane obtained a pure water flux of 51.3 LMH, which is 2.1 times greater than the bare CA and high BSA and dye rejections with 97.20% and 93.7% respectively. Finally, the antifouling resistance of the CA membrane was greatly improved with FRR increasing from 73.7% to 94.8%, which was accompanied by a significant decrease in the fouling resistance parameters.