Algal bloom sedimentation induces variable control of lake eutrophication by phosphorus inactivating agents.

Lake eutrophication typically occurs with a syndrome of algae breeding and biomass accumulation (e.g., algal blooms). Therefore, the effect of algal bloom sedimentation on eutrophication control by phosphorus (P) inactivating agents was assessed herein. Three commercial products, including aluminum (Al) sulfate, iron (Fe) sulfate, and a lanthanum-modified clay (Phoslock®), as well as one easily available by-product, drinking water treatment residue (DWTR), were selected. The most important finding was that during algae sedimentation, P immobilization from the overlying water by Al, Phoslock®, and DWTR was dominated by a long-term slow phase (>150d), while Fe has limited effectiveness on the immobilization. Further analysis indicated that the algae sedimentation effect was mainly due to the slow release of P from algae, leading to relatively limited P available for the inactivating agents. Then, a more unfavorable effect on the P immobilization capability of inactivating agents was caused by the induced anaerobic conditions, the released organic matter from algae, and the increased sulfide in the overlying water and sediments during sedimentation. Overall, algae sedimentation induced variable control of eutrophication by P inactivating agents. Accordingly, recommendations for future works about algal lake restoration were also proposed.