Source and composition analysis of petroleum hydrocarbons in the refinery circulating water.

Oil leakage from water coolers in refinery circulating water occurs from time to time, which affects the long-term and stable operation of refinery units. So far, workers in the refineries still adopt manual check methods, opening water coolers one by one and checking the water's smell and color to find out the spilled water coolers. In this study, a more rapid method of source appointment of oil spill in the circulating water by combining chemical fingerprinting with model recognition was developed. Firstly, chemical fingerprints including benzene/naphthalene series, and light hydrocarbon (C3-C5) in oil samples from all water coolers in the refinery fluid catalytic cracking (FCC) unit were analyzed by gas chromatography-mass spectrometry (GC/MS). Gasoline, diesel, and poor oil could be distinguished in terms of benzene and naphthalene distribution. The three similar types of gasolines could be distinguished by the volatile hydrocarbons especially C3-C4. The classification model for the spill of gasoline, diesel, and poor oil in circulating water was constructed by the partial least squares discriminant analysis algorithm with a 100% correct classification rate at the concentration more than 10 ppm. The gasoline spills in the circulating backwater of the refinery were successfully recognized by the classification model. This method enables the rapid prediction of oil spill type in refinery circulating water, and a similar method by installing online instrument and software potentially can be used for monitoring the circulating water in real time.