Two stage leaching of activated spent HDS catalyst and solvent extraction of aluminium using organo-phosphinic extractant, Cyanex 272.

Spent catalyst generally contains valuable metals like Mo, Co, Ni on a supporting material, such as gamma-A1(2)O(3). In the present study, a two stage alkali/acid leaching process is proposed to selectively target molybdenum and cobalt/nickel separately to facilitate the downstream processing. Prior to the leaching, the spent catalyst was calcined at 500 degrees C to remove C and S; and to convert metal sulphides to metal oxides. 98% Mo, 93% Co and 90% Ni was effectively recovered by this process. The sulphuric acid leaching of spent catalyst, previously treated by alkali solutions to remove Mo, yielded a solution rich in Ni, Co and Al. In order to recover Co and Ni, the Al impurity must be eliminated. The extraction and stripping of Al has been carried out using the organo-phosphinic extractant, Cyanex 272 diluted in carbon tetrachloride. Quantitative Al extraction efficiency was achieved with 1.0M Cyanex 272 in two stages at an aqueous:organic (A:O) phase ratio of 1:1 and equilibrium pH of 3.2. Complete stripping of Al from the loaded organic was carried out using 2M H(2)SO(4) at an A:O phase ratio of 1:1. The extraction reaction proceeded via the cation exchange mechanism and the extracted species was assumed to be AlA(3).3HA. The extraction of Al was carried out in the presence of various ions to ascertain the tolerance limit of individual ions. The regenerated solvent was successfully used for 8 cycles without any significant loss of extraction efficiency, suggesting that Cyanex 272 is extremely stable under present experimental conditions.