Screen-Printing of Functionalized MWCNT-PEDOT:PSS Based Solutions on Bendable Substrate for Ammonia Gas Sensing.

Multi-walled carbon nanotubes (MWCNTs) were grown on a stainless-steel foil by thermal chemical vapor deposition (CVD) process. The MWCNTs were functionalized with carboxylic groups (COOH) on their surfaces by using oxidation and acid (3:1 H2SO4/HNO3) treatments for improving the solubility property of them in the solvent. The functionalized MWCNTs (f-MWCNTs) were conducted to prepare the solution by continuous stir in poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), dimethyl sulfoxide (DMSO), ethylene glycol (EG) and Triton X-100. The solution was deposited onto a bendable substrate such as polyethylene terephthalate (PET) with a fabricated silver interdigitated electrode for application in a room-temperature gas sensor. A homemade-doctor blade coater, an UNO R3 Arduino board and a L298N motor driver are presented as a suitable system for screen printing the solution onto the gas-sensing substrates. The different contents of f-MWCNTs embedded in PEDOT:PSS were compared in the gas response to ammonia (NH3), ethanol (C2H5OH), benzene (C6H6), and acetone (C3H6O) vapors. The results demonstrate that the 3.0% v/v of f-MWCNT solution dissolved in 87.8% v/v of PEDOT:PSS, 5.4% v/v of DMSO, 3.6% v/v of EG and 0.2% v/v of Triton X-100 shows the highest response to 80 ppm NH3. Finally, the reduction in the NH3 response under heavy substrate-bending is also discussed.