ACS applied materials & interfaces · 2020
Hierarchical ZnO@Hybrid Carbon Core-Shell Nanowire Array on a Graphene Fiber Microelectrode for Ultrasensitive Detection of 2,4,6-Trinitrotoluene.
СтатьяНазвание и аннотация: Перевод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Wang Yuze, Xu Ruoyu, Chen Liwei, Wu Chongbei, Qiu Lili, Windle Christopher D, Han Qing, Qu Liangti
Аннотация
A hierarchical architecture composed of nitrogen (N)-rich carbon@graphitic carbon-coated ZnO nanowire arrays on a graphene fiber (ZnO@C/GF) was fabricated by direct growth of a ZnO@zeolitic imidazolate framework-8 (ZIF-8) core-shell nanowire array on a GF followed by annealing and used as a microelectrode for detection of 2,4,6-trinitrotoluene (TNT). In such a design, ZnO accumulated TNT through a strong nitroxide-zinc interaction and ZIF-8 served as the precursor of the N-rich carbon@graphitic carbon layer that seamlessly connected ZnO with the GF to improve the poor conductivity of ZnO, thus enhancing the sensitivity of the ZnO@C/GF microelectrode. The constructed hierarchical hybrid fiber microsensor exhibited a wide linear response to TNT in a concentration range of 0.1-32.2 μM with a low detection limit of 3.3 nM. This ZnO@C/GF microelectrode was further successfully applied to the detection of TNT in lake and tap water, indicating its promise as a portable sensor for the electrochemical detection of explosive compounds.