Effective Insensitiveness of Melamine Urea-Formaldehyde Resin via Interfacial Polymerization on Nitramine Explosives.

To improve the safety of ammonium nitrate explosives, the melamine urea-formaldehyde resin (MUF resin) was selected for the preparation of three typical nitramine explosives (cyclotetramethylenetetranitramine, HMX; cryclo-trimethylenetrinitramine, RDX; and hexanitrohexaazaisowurtzitane, CL-20) based green polymer-bonded explosives (GPBXs) via interfacial polymerization. Meanwhile, the corresponding composite particles prepared by physical mixing and drying bath methods were studied and compared. The particle morphology, crystal structure, thermal stability, and safety performance of the resultant composite particles were characterized by scanning electron microscopy (SEM), powder X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectra, differential scanning calorimeter (DSC), and impact sensitivity test, respectively. SEM results showed that MUF was successfully coated on the surface of the three explosives, and different composite particles prepared by the same method have their own unique characteristics. Such effect is attributed to the resin's ability to isolate and buffer external stimuli. It is obvious that the interfacial polymerization is an effective desensitization technique to prepare core-shell composite particles for explosives.