MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.biortech.2020.124033

Медицинская библиотека · Bioresource technology · 2020

Effects of reaction conditions on products and elements distribution via hydrothermal liquefaction of duckweed for wastewater treatment.

Chen Guanyi, Yu Yingying, Li Wanqing, Yan Beibei, Zhao Kaige, Dong Xiaoshan, Cheng Zhanjun, Lin Fawei, Li Liping, Zhao Hai, Fang Yang

СтатьяПеревод в очереди

Аннотация

Wastewater treatment by duckweed is a naturally sustainable technology. However, its development is limited due to the lack of a follow-up treatment of duckweed. The duckweed was proposed for the treatment of rural domestic wastewater and agricultural wastewater, and it was further processed to produce bio-oil via hydrothermal liquefaction at various temperatures (250 °C-370 °C) and residence times (15-60 min). The highest bio-oil yield of 35.6 wt% was obtained at 370 °C, 45 min. The higher heating value of bio-oil was 40.85 MJ/kg, and the H/C ratio (1.72-1.98) was similar to that of petroleum (1.84). The gas chromatography-mass spectrometry analysis results revealed that the bio-oil mainly consisted of N-heterocycles, cyclic ketones, esters, amides, long-chain hydrocarbons, phenols, and aromatic intermediates. Valuable compounds (3-pyridinol, 2-pyrrolidinone, and its analogues) of high concentration were identified in the water-soluble organic matter. Compared with other materials, this study produced higher-quality bio-oil and water-soluble organic matter.

Для цитирования: Chen Guanyi, Yu Yingying, Li Wanqing, Yan Beibei, Zhao Kaige, Dong Xiaoshan, Cheng Zhanjun, Lin Fawei, Li Liping, Zhao Hai, Fang Yang. Effects of reaction conditions on products and elements distribution via hydrothermal liquefaction of duckweed for wastewater treatment.. Bioresource technology. 2020. DOI: 10.1016/j.biortech.2020.124033.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.