Modification of in vitro degradation behavior of pure iron with ultrasonication treatment: Comparison of two different pseudo-physiological solutions.

An ultrasonication treatment is developed as an external method to control the degradation behavior of pure iron. Immersion tests (weight loss measurements) and electrochemical measurements were conducted in two different pseudo-physiological solutions, simulated body fluid (SBF) and Dulbecco's modified Eagle medium (DMEM) solution. By the comparison study in these two different solutions, more information and the mechanism of the degradation process can be revealed. Degradation morphologies (with and without ultrasonication treatment) were observed by scanning electron microscope (SEM), and degradation products on the surface were characterized by Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS). Moreover, the biocompatibility of iron surfaces after being ultrasonicated was evaluated. Ultrasonication was found to accelerate the degradation rate in DMEM, while it makes no difference in SBF solution; the origin of this different behavior is investigated and discussed. The parameters of the ultrasonication treatment, intensity and frequency, show an influence on the degradation rate. No adverse effects on the proliferation and adhesion of human osteoblast-like cells (MG-63) are observed on surfaces after ultrasonication treatment, as compared to bare iron. Based on these results, ultrasonication treatment is considered to have high potential to control the biodegradation behavior of iron-based materials in an external and flexible manner.