MedElevator Войти в исследования
← Поиск публикаций

DOI 10.3390/ma15228225

Медицинская библиотека · Materials (Basel, Switzerland) · 2022

Effect of Al and Fe Doping on the Electrochemical Behavior of Li1.2Ni0.133Mn0.534Co0.133O2 Li-Rich Cathode Material.

Medvedeva Anna, Makhonina Elena, Pechen Lidia, Politov Yury, Rumyantsev Aleksander, Koshtyal Yury, Goloveshkin Alexander, Maslakov Konstantin, Eremenko Igor

СтатьяПеревод в очереди

Аннотация

This article studies the doping of Li-rich cathode materials. Aluminum and iron were chosen as dopants. Li-rich cathode materials for lithium-ion batteries, which were composed of Li1.2Ni0.133Mn0.534Co0.133O2 with a partial replacement of cobalt (2 at %) by iron and aluminum, were synthesized. The dopants were introduced at the precursor synthesis stage by co-precipitation. The presence of Fe and Al in the composition of the synthesized samples was proved by inductively coupled plasma mass spectrometry, X-ray diffraction analysis and X-ray microanalysis. The cathode materials were tested electrochemically. The incorporation of Al and Fe into the structure of lithium-enriched materials improved the cyclability and reduced the voltage fade of the cathodes. An analysis of the electrochemical data showed that the structural changes that occur in the initial cycles are different for the doped and starting materials and affect their cycling stability. The partial cation substitution suppressed the unfavorable phase transition to lower-voltage structures and improved the electrochemical performance of the materials under study.

Для цитирования: Medvedeva Anna, Makhonina Elena, Pechen Lidia, Politov Yury, Rumyantsev Aleksander, Koshtyal Yury, Goloveshkin Alexander, Maslakov Konstantin, Eremenko Igor. Effect of Al and Fe Doping on the Electrochemical Behavior of Li1.2Ni0.133Mn0.534Co0.133O2 Li-Rich Cathode Material.. Materials (Basel, Switzerland). 2022. DOI: 10.3390/ma15228225.
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.