MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.chemosphere.2017.11.166

Медицинская библиотека · Chemosphere · 2017

Role of dissolved oxygen on the degradation mechanism of Reactive Green 19 and electricity generation in photocatalytic fuel cell.

Lee Sin-Li, Ho Li-Ngee, Ong Soon-An, Wong Yee-Shian, Voon Chun-Hong, Khalik Wan Fadhilah, Yusoff Nik Athirah, Nordin Noradiba

СтатьяПеревод в очереди

Аннотация

In this study, a membraneless photocatalytic fuel cell with zinc oxide loaded carbon photoanode and platinum loaded carbon cathode was constructed to investigate the impact of dissolved oxygen on the mechanism of dye degradation and electricity generation of photocatalytic fuel cell. The photocatalytic fuel cell with high and low aeration rate, no aeration and nitrogen purged were investigated, respectively. The degradation rate of diazo dye Reactive Green 19 and the electricity generation was enhanced in photocatalytic fuel cell with higher dissolved oxygen concentration. However, the photocatalytic fuel cell was still able to perform 37% of decolorization in a slow rate (k = 0.033 h-1) under extremely low dissolved oxygen concentration (approximately 0.2 mg L-1) when nitrogen gas was introduced into the fuel cell throughout the 8 h. However, the change of the UV-Vis spectrum indicates that the intermediates of the dye could not be mineralized under insufficient dissolved oxygen level. In the aspect of electricity generation, the maximum short circuit current (0.0041 mA cm-2) and power density (0.00028 mW cm-2) of the air purged photocatalytic fuel cell was obviously higher than that with nitrogen purging (0.0015 mA cm-2 and 0.00008 mW cm-2).

Для цитирования: Lee Sin-Li, Ho Li-Ngee, Ong Soon-An, Wong Yee-Shian, Voon Chun-Hong, Khalik Wan Fadhilah, Yusoff Nik Athirah, Nordin Noradiba. Role of dissolved oxygen on the degradation mechanism of Reactive Green 19 and electricity generation in photocatalytic fuel cell.. Chemosphere. 2017. DOI: 10.1016/j.chemosphere.2017.11.166.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.