MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.jhazmat.2005.11.014

Медицинская библиотека · Journal of hazardous materials · 2005

Enhanced electrokinetic dissolution of naphthalene and 2,4-DNT from contaminated soils.

Jiradecha Chatdanai, Urgun-Demirtas Meltem, Pagilla Krishna

СтатьяПеревод в очереди

Аннотация

Electrokinetic soil remediation has been proven to remove heavy metals and polar organics from low hydraulic conductivity subsurface environment. In this study, carboxymethyl-beta-cyclodextrin (CMCD) was used as a carrier to assist electrokinetic treatment for removal of low polarity organic contaminants from soils (2.2% organic carbon content). Naphthalene and 2,4-dinitrotoluene (2,4-DNT) were selected as the test compounds. The results from columns experiments showed that 46 and 43% of naphthalene and 2,4-DNT, respectively, were removed using 0.01 N NaNO(3) flushing solution with 40 V electrical potential while 70 and 72% of naphthalene and 2,4-DNT were removed using 2 g/L CMCD solution. Naphthalene and 2,4-DNT removal was enhanced to 83 and 89%, respectively, by using 2 g/L CMCD with 40 V electrical potential. Findings from this study also demonstrated that cyclodextrin assisted electrokinetics can enhance the removal rate of naphthalene and 2,4-DNT. Electric potential applied has more influence on the contaminant removal than the amount of CMCD used. Higher voltage application caused increase in the removal rate of naphthalene and 2,4-DNT, and appeared to be one of the critical factors in obtaining higher contaminant removal while increasing CMCD solution concentration above 2 g/L appeared to have little effect on the contaminant removal.

Для цитирования: Jiradecha Chatdanai, Urgun-Demirtas Meltem, Pagilla Krishna. Enhanced electrokinetic dissolution of naphthalene and 2,4-DNT from contaminated soils.. Journal of hazardous materials. 2005. DOI: 10.1016/j.jhazmat.2005.11.014.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.