Reducing Pre- and Post-Treatments in Cryopreservation Protocol and Testing Storage at -80 °C for Norway Spruce Embryogenic Cultures.

Somatic embryogenesis (SE) is considered the most effective method for vegetative propagation of Norway spruce (Picea abies L. Karst). For mass propagation, a storage method that is able to handle large quantities of embryogenic tissues (ETs) reliably and at a low cost is required. The aim of the present study was to compare freezing at -80 °C in a freezer to cryopreservation using liquid nitrogen (LN) as a method for storing Norway spruce ETs. The possibility of simplifying both the pre-treatment and thawing processes in cryopreservation was also studied. The addition of abscisic acid (ABA) to the pre-treatment media and using polyethylene glycol PEG4000 instead of PEG6000 in a cryoprotectant solution were tested. Both the pre-and post-treatments on semi-solid media could be simplified by reducing the number of media, without any loss of genotype or embryo production capacity of ETs. On the contrary, the storage of ETs in a freezer at -80 °C instead of using LN was not possible, and the addition of ABA to the pre-treatment media did not provide benefits but increased costs. The lower regeneration rate after using PEG4000 instead of PEG6000 in a cryoprotectant solution in cryovials was unexpected and unwanted. The simplified pre-and post-treatment protocol will remarkably reduce the workload and costs in the mass-cryopreservation of future forest regeneration materials and in thawing the samples for mass propagations, respectively.