MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1080/09593330.2018.1440010

Медицинская библиотека · Environmental technology · 2018

Photocatalytic degradation of H2S in the gas-phase using a continuous flow reactor coated with TiO2-based acrylic paint.

Lied Eduardo Borges, Morejon Camilo Freddy Mendoza, Basso Rodrigo Leonardo de Oliveira, Trevisan Ana Paula, Bittencourt Paulo Rodrigo Stival, Fronza Fábio Luiz

СтатьяПеревод в очереди

Аннотация

For the photocatalytic degradation of the hydrogen sulphide (H2S) in the gas-phase it was developed a rectangular reactor, coated with acrylic paint supported on fiber cement material. The surface formed by the paint coverage was characterized structural and morphologically by scanning electron microscopy with energy dispersive X-ray and X-ray diffraction analysis. The flow rate and the inlet concentration of H2S were evaluated as operational performance parameters of the reactor. Removal efficiencies of up to 94% were obtained at a flow rate of 2 L min-1 (residence time of 115 s) and inlet concentration of 31 ppm of H2S. In addition, the H2S degradation kinetics was modelled according to the Langmuir-Hinshelwood (L-H) model for the inlet concentrations of 8-23 ppm of H2S. The results suggest that flow rate has a more important influence on photocatalytic degradation than the inlet concentration. It is assumed that H2S has been oxidized to SO42- , a condition that led to a deactivation of the photocatalyst after 193 min of semi-continuous use.

Для цитирования: Lied Eduardo Borges, Morejon Camilo Freddy Mendoza, Basso Rodrigo Leonardo de Oliveira, Trevisan Ana Paula, Bittencourt Paulo Rodrigo Stival, Fronza Fábio Luiz. Photocatalytic degradation of H2S in the gas-phase using a continuous flow reactor coated with TiO2-based acrylic paint.. Environmental technology. 2018. DOI: 10.1080/09593330.2018.1440010.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.