In situ measurements of electrical resistivity of metals in a cubic multi-anvil apparatus by van der Pauw method.
Аннотация
On the basis of the van der Pauw method, we developed a new technique for measuring the electrical resistivity of metals in a cubic multi-anvil high-pressure apparatus. Four electrode wires were introduced into the sample chamber and in contact with the pre-pressed metal disk on the periphery. The sample temperature was measured with a NiCr-NiSi (K-type) thermocouple, which was separated from the sample by a thin hexagonal boron nitride layer. The electrodes and thermocouple were electrically insulated from each other and from the heater by an alumina tube as well. Their leads were in connection with cables through the gap between the tungsten carbide anvils. We performed experiments to determine the temperature dependence of electrical resistivity of pure iron at 3 and 5 GPa. The experiments produce reproducible measurements and the results provide an independent check on electrical resistivity data produced by other methods. The new technique provides reliable electrical resistivity measurements of metallic alloys and compounds at high pressure and temperature.
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.