Investigating the effect of copper and magnesium ions on nitrogen removal capacity of pure cultures by modified non-competitive inhibition model.

Copper, a common heavy metal, may be beneficial for or poisonous to microbial activity. The objective of this study was to determine the effect of different copper ion concentrations on the nitrogen removal performance of Arthrobacter arilaitensis strain Y-10 and Pseudomonas taiwanensis strain J488. The non-competitive inhibition model was employed to evaluate the 50% inhibition concentrations (IC50 values) of copper ions toward the pure strains. In the absence of magnesium ions, a low concentration of copper (0.1 mg/L) significantly enhanced the ammonium removal ability of strain Y-10 and its removal efficiency increased by 10.88% compared with the control treatment. Copper ranging from 0 to 0.1 mg/L had no significant effect on the ammonium removal capacity of strain J488. After adding 9.90 mg/L of magnesium to the basal medium, the effects of copper on nitrification of ammonium or denitrification of nitrate or nitrite were also assessed. In these conditions, 0.25 mg/L copper ions could strongly inhibit the ammonium, nitrate and nitrite removal activities for strain Y-10. For strain J488, no clear deterioration in ammonium removal efficiency was observed at copper ion concentrations below 0.5 mg/L, but 0.25 mg/L copper ions significantly inhibited nitrate and nitrite removal efficiencies, which were only 45.88% and 6.35%, respectively. The IC50 values of copper ions for nitrate and nitrite removal by strain Y-10 were 0.195 and 0.090 mg/L respectively; for strain J488, the IC50 values were 0.175 and 0.196 mg/L. The magnesium ions could improve the cell growth, nitrogen removal efficiency and copper ion resistance of bacteria.