MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1080/02652030802163380

Медицинская библиотека · Food additives & contaminants. Part A, Chemistry, analysis, control, exposure & risk assessment · 2008

Determination of 2,6-diisopropylnaphthalene (DIPN) and n-dibutylphthalate (DBP) in food and paper packaging materials from US marketplaces.

Zhang K, Noonan G O, Begley T H

СтатьяПеревод в очереди

Аннотация

A gas chromatography-ion-trap tandem mass spectrometry procedure was developed for the determination of 2,6-diisopropylnaphthalene (DIPN) and n-dibutylphthalate (DBP) in domestic and imported paper packages and food sold in US marketplaces. The procedure involved ultrasonic extraction with dichloromethane, followed by analysis with the gas chromatography-ion-trap tandem mass spectrometry. Calibration curves for DIPN and DBP were achieved with concentrations ranging from 0.01 to 10 microg ml(-1) and the corresponding r(2) values were 0.9976 and 0.9956, respectively. In most of the fortified samples the recoveries were higher than 80% with a relative standard deviation (RSD) <10%. Using this procedure, it was found that less than 20% of the tested domestic packages and more than 60% of the tested imported food packages contained both DIPN and DBP. The concentrations of DIPN and DBP ranged from 0.09 to 20 mg kg(-1) and 0.14 to 55 mg kg(-1), respectively, with most of the DINP and DBP levels lower than 20 mg kg(-1). DIPN was not detected (<0.01 mg kg(-1)) in 41 food samples and DBP was only detected in two domestic and four imported food samples with concentrations ranging from <0.01 to 0.81 mg kg(-1).

Для цитирования: Zhang K, Noonan G O, Begley T H. Determination of 2,6-diisopropylnaphthalene (DIPN) and n-dibutylphthalate (DBP) in food and paper packaging materials from US marketplaces.. Food additives & contaminants. Part A, Chemistry, analysis, control, exposure & risk assessment. 2008. DOI: 10.1080/02652030802163380.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.