MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.ultsonch.2018.02.011

Медицинская библиотека · Ultrasonics sonochemistry · 2018

Synthesis of Fe3O4@CuS@Ni2P-CNTs magnetic nanocomposite for sonochemical-assisted sorption and pre-concentration of trace Allura Red from aqueous samples prior to HPLC-UV detection: CCD-RSM design.

Asfaram Arash, Ghaedi Mehrorang, Abidi Hassan, Javadian Hamedreza, Zoladl Mohammad, Sadeghfar Fardin

СтатьяПеревод в очереди

Аннотация

A simple procedure based on ultrasound-assisted (UA) dispersive micro solid phase extraction (D-μ-SPE) was applied for sorption of trace amount Allura Red (AR) in fruit juice and water samples. After loading process by UA-D-μ-SPE, the concentrated AR was eluted and monitored using high-performance liquid chromatography-ultraviolet -visible detector (HPLC-UV). The best operational conditions were obtained as follows: pH = 3.0, 8 mg of the sorbent, sonication time of 4.5 min and 0.16 mL of THF as elution solvent. Under the optimum operational conditions, the present method was acceptable for AR quantification in the range of 1.0-5000 ng mL-1. The repeatability based on RSD with the amount of 1.67-3.18%, low LOD (0.198 ng mL-1) and LOQ (0.659 ng mL-1) were obtained. The UA-D-μ-SPE-HPLC-UV method was successfully applied for trace quantification of AR from water and commercial fruit juice samples supplied from local supermarkets, and acceptable relative recoveries over the range of 97.7-105.4% with RSDs ≤5.50% were obtained.

Для цитирования: Asfaram Arash, Ghaedi Mehrorang, Abidi Hassan, Javadian Hamedreza, Zoladl Mohammad, Sadeghfar Fardin. Synthesis of Fe3O4@CuS@Ni2P-CNTs magnetic nanocomposite for sonochemical-assisted sorption and pre-concentration of trace Allura Red from aqueous samples prior to HPLC-UV detection: CCD-RSM design.. Ultrasonics sonochemistry. 2018. DOI: 10.1016/j.ultsonch.2018.02.011.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.