Development of a Methodology for Simulating Complex Head Impacts With the Advanced Combat Helmet.

Blunt impact assessment of the Advanced Combat Helmet (ACH) is currently based on the linear head response. The current study presents a methodology for testing the ACH under complex loading that generates linear and rotational head motion. Experiments were performed on a guided, free-fall drop tower using an instrumented National Operating Committee for Standards on Athletic Equipment (NOCSAE) head attached to a Hybrid III (HIII) or EuroSID-2 (ES-2) dummy neck and carriage. Rear and lateral impacts occurred at 3.0 m/s with peak linear accelerations (PLA) and peak rotational accelerations (PRA) measured at the NOCSAE head center-of-gravity. Experimental data served as inputs for the Simulated Injury Monitor (SIMon) computational model to estimate brain strain. Rear ACH impacts had 22% and 7% higher PLA and PRA when using the HIII neck versus the ES-2 neck. Lateral ACH impacts had 33% and 35% lower PLA and PRA when using HIII neck versus the ES-2 neck. Computational results showed that total estimated brain strain increased by 25% and 76% under rear and lateral ACH impacts when using the ES-2 neck. This methodology was developed to simulate complex ACH impacts involving the rotational head motion associated with diffuse brain injuries, including concussion, in military environments.