MedElevator Войти в исследования
← Поиск публикаций

DOI 10.3390/s26010240

Медицинская библиотека · Sensors (Basel, Switzerland) · 2025

UAV Vision-Based Method for Multi-Point Displacement Measurement of Bridges.

Pan Deyong, Dai Wujiao, Xing Lei, Yu Zhiwu, Wu Jun, Zhang Yunsheng

СтатьяПеревод в очереди

Аннотация

The challenge of insufficient monitoring accuracy in vision-based multi-point displacement measurement of bridges using Unmanned Aerial Vehicles (UAVs) stems from camera motion interference and the limitations in camera performance. Existing methods for UAV motion correction often fall short of achieving the high precision necessary for effective bridge monitoring, and there is a deficiency of high-performance cameras that can function as adaptive sensors. To address these challenges, this paper proposes a UAV vision-based method for multi-point displacement measurement of bridges and introduces a monitoring system that includes a UAV-mounted camera, a computing terminal, and targets. The proposed technique was applied to monitor the dynamic displacements of the Lunzhou Highway Bridge in Qingyuan City, Guangdong Province, China. The research reveals the deformation behavior of the bridge under vehicle traffic loads. Field test results show that the system can accurately measure vertical multi-point displacements across the entire span of the bridge, with monitoring results closely matching those obtained from a Scheimpflug camera. With a root mean square error (RMSE) of less than 0.3 mm, the proposed method provides essential data necessary for bridge displacement monitoring and safety assessments.

Для цитирования: Pan Deyong, Dai Wujiao, Xing Lei, Yu Zhiwu, Wu Jun, Zhang Yunsheng. UAV Vision-Based Method for Multi-Point Displacement Measurement of Bridges.. Sensors (Basel, Switzerland). 2025. DOI: 10.3390/s26010240.
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.