Maximum acceptable forces of dynamic pushing: comparison of two techniques.

The purpose of this experiment was to investigate maximum acceptable initial and sustained forces while performing a push of 7.6 m, performed at a frequency of 1 push min-1 on a magnetic particle brake treadmill and a high-inertia push-cart. Eight male industrial workers performed a 40 min treadmill pushing task in the context of a larger experiment and two, 2 h push-cart tasks with a unique water loading system. A psychophysical methodology was employed, whereby the subjects were asked to select a workload they could sustain for 8 h without straining themselves or without becoming unusually tired, weakened, overheated or out of breath. The results revealed that maximum acceptable initial and sustained forces of pushing on the high inertia cart were significantly higher (28 and 23%, respectively) than pushing forces on the magnetic particle brake treadmill. It was concluded that adjustments to the pushing and pulling data bank by Snook and Ciriello (1991) may be appropriate if verification of this experiment yields similar results.