Mechanical Properties and Microstructure of Bonded Joints and Hybrid Structures with a 3D-Printed Honeycomb Core Modified with an Epoxy Matrix Filled with Recycled Polyurethane Foam.

This article examines the reuse of waste polyurethane foam (PUF) as a material in line with circular economy principles. The main objective was to evaluate how crushed polyurethane filler of different bulk densities-35 kg·m-3 (PUF35), 60 kg·m-3 (PUF60), and their blends at 1-5 wt%-affects the mechanical behaviour and structural integrity of hybrid composite systems and bonded laminated joints. An epoxy resin matrix was combined with 3D-printed polylactide (PLA) honeycomb structures, with rectangular and hexagonal core geometries. Static tensile tests showed that the blended filler (PUF35/60) preserves tensile strength and increases the modulus of elasticity for both core geometries, reaching maximum values at 4 wt% (3.8 GPa for rectangular, 3.6 GPa for hexagonal cores). In bonded lap joints, 1 wt% PUF35 resulted in the highest tensile adhesive bond strength (13.3 MPa). SEM confirmed a high-quality phase interface and continuous adhesive contact between the epoxy matrix and the 3D-printed PLA surface, with dominant cohesive failure and effective mechanical anchoring of foam particles, even near local printing defects. The results confirm mechanically recycled PUF as a promising filler for advanced sandwich structures and adhesive systems.