MedElevator Войти в исследования
← Поиск публикаций

DOI 10.4103/jpbs.jpbs_1016_24

Медицинская библиотека · Journal of pharmacy & bioallied sciences · 2025

Comparative Analysis of Color Stability among 3D-Printed Resin-Based, CAD/CAM, and Conventional Interim Fixed Prosthodontic Materials.

Alshamrani Shahad Abdulrahman, Alobaid Bushra Fahad, Alharkan Hamad Mohammad

СтатьяПеревод в очереди

Аннотация

OBJECTIVE

This study aims to assess and compare the color stability of 3D-printed, computer-aided design-computer-aided manufacturing (CAD-CAM)-milled, and conventional materials used in interim dental restorations.

MATERIALS AND

METHODS

Sixty-four disc-shaped specimens (10 mm diameter, 1.5 mm thickness) were fabricated from four types of interim materials: autopolymerizing polymethyl methacrylate (PMMA), bis-acryl composite resin, CAD-CAM PMMA resin, and 3D-printed provisional resin. Each group of polished specimens was divided into four subgroups (n = 4) and immersed in different staining solutions (distilled water, cola, coffee, and tea) at 37°C and 100% humidity without light exposure for 1 day, 7 days, and 30 days. Color changes were measured using a calibrated clinical spectrophotometer.

RESULTS

The type of material, staining solution, immersion period, and their interactions significantly influenced color stability (P < 0.001). Bis-acryl and 3D-printed materials exhibited the most discoloration, with coffee and tea causing the highest color changes. CAD-CAM-milled and PMMA materials demonstrated superior color stability, particularly in water and cola.

CONCLUSION

Bis-acryl and 3D-printed materials showed significant and clinically unacceptable color changes, while CAD-CAM-milled and PMMA materials maintained color stability within clinically acceptable limits (ΔE ≈ 3.3). CAD-CAM and PMMA are preferred for interim restorations where color stability is critical.

Для цитирования: Alshamrani Shahad Abdulrahman, Alobaid Bushra Fahad, Alharkan Hamad Mohammad. Comparative Analysis of Color Stability among 3D-Printed Resin-Based, CAD/CAM, and Conventional Interim Fixed Prosthodontic Materials.. Journal of pharmacy & bioallied sciences. 2025. DOI: 10.4103/jpbs.jpbs_1016_24.
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.