MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1021/acsomega.4c09548

Медицинская библиотека · ACS omega · 2025

Fully Printed Flexible Polystyrene/Graphite-Based Temperature Sensor with Excellent Properties for Potential Smart Applications.

Al Shboul Ahmad, Ketabi Mohsen, Ngai Jenner H L, Skaf Daniella, Rondeau-Gagné Simon, Izquierdo Ricardo

СтатьяПеревод в очереди

Аннотация

This study presents an innovative temperature sensor based on a thermistor nanocomposite of graphite (Gt) and polystyrene (PS). The sensor exhibited notable thermal stability and film integrity, offering two distinct linear response regions within the tested temperature range of -10 to 60 °C. It demonstrated a sensitivity of 0.125% °C-1 between -10 and 10 °C, followed by another linear response with a sensitivity of 0.41% °C-1 from 20 to 60 °C. Furthermore, it exhibited a response/recovery time of 0.97/1.3 min at a heating/cooling rate of 60 °C min-1. The sensor maintained minimal baseline drift even when subjected to varying humidity levels. We assessed its mechanical flexibility and stability for hundreds of bending cycles at a bending angle of 30°, adapting to dynamic environmental conditions. The sensor's thermomechanical test (response to mechanical stress under temperature fluctuations) underscored its adaptability over a temperature range of -10 to 60 °C. Notably, it displayed excellent chemical stability, maintaining consistent performance when subjected to harsh environmental conditions like exposure to corrosive gases and prolonged immersion in tap water. Real-world tests demonstrated its practical utility, including precise temperature measurements in solid objects and breath temperature monitoring. These findings suggest promising applications in healthcare, environmental monitoring, and various IoT applications.

Для цитирования: Al Shboul Ahmad, Ketabi Mohsen, Ngai Jenner H L, Skaf Daniella, Rondeau-Gagné Simon, Izquierdo Ricardo. Fully Printed Flexible Polystyrene/Graphite-Based Temperature Sensor with Excellent Properties for Potential Smart Applications.. ACS omega. 2025. DOI: 10.1021/acsomega.4c09548.
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.