Investigating intermittent immersion during osmotic dehydration of mango (Mangifera indica L. Moench). Part A: Determination of optimal conditions for mango (Mangifera indica L. Moench) dehydration impregnation by immersion (D2I) and intermittent immersion (D3I).

This work aimed to determine the optimum conditions for dehydration impregnation by immersion (D2I) and by intermittent immersion (D3I) of mango (Mangifera indica) slices measuring 4 × 1 × 1 cm3. To this end, the Doehlert response surface plan was used, with the following factors for D2I: the volume of D2I solution/fruit mass ratio (6/1-13/1 mL/g), the process time (120-360 min) and the Brix degree of the solution (45-65 °Brix) and with the following factors for D3I: immersion time (20-60 min), process time (60-300 min) and de-immersion time (7-25 min). The temperature was fixed according to literature at 35 °C. The optimum responses obtained for the D2I process were (47.63 ± 1.79) g/100 g (w-b) for water loss, and (6.67 ± 1.04) g/100 g (w-b) for solute gain, for optimum operating conditions of 6/1 mL/g; 245 min and 61.6°Brix respectively for the immersion ratio, process time and solute concentration of the hypertonic solution. The optimum responses obtained for D3I process were (47.98 ± 2.12) g/100 g (w-b) for water loss, and (4.31 ± 0.052) g/100 g (w-b) for solute gain (SG), for operating conditions of 21; 270; and 9 min, respectively for immersion time, process time and de-immersion time. The Student's t-test on the predicted and experimental optima of WL and SG revealed valuable insights for comparing these two processes. The present study will undoubtedly introduce a new dynamic to the osmotic dehydration systems for fruits and vegetables.