Impact of Cleaning Procedures on Adhesion of Living Cells to Three Abutment Materials.

PURPOSE: To test the adhesion properties of live gingival fibroblasts to three different implant abutment materials after five different cleaning procedures.

MATERIALS AND

METHODS

Highly polished discs of lithium disilicate (LS), zirconium dioxide (Zr), and titanium alloy (Ti) were fabricated. The specimens were cleaned by one of five different methods: steam (S), argon plasma (AP), ultrasound and disinfection (UD), ultrasound and sterilization in an autoclave (UA), or photofunctionalization with high-intensity ultraviolet light (PF). Cell detachment force (adhesion) was measured by single-cell force spectroscopy, which is a method to quantify cell adhesion at the single cell level. Data were statistically analyzed using parametric tests (analysis of variance [ANOVA], t tests).

RESULTS

Cell detachment forces in the low nN regime were recorded in all experiments. Significant differences in cell adhesion on the different materials were found as a function of the cleaning method (P ≤ .0001). For LS abutments, no significant differences between the cleaning methods could be found (P > .05). For Zr specimens, the AP method showed the highest cell detachment forces, followed by UD, PF, S, and UA (S/UD, S/UA, S/PF, AP/UD, and UD/PF were not significantly different from each other). For Ti abutments, UD showed the highest cell detachment forces, followed by S, AP, and UA/PF (S/UD, S/UA, S/PF, AP/U, and UA/PF were not significantly different from each other).

CONCLUSION

All cleaning methods provided comparable cell detachment forces for LS abutments. AP/PF or ultrasonic cleaning were the most suitable methods for strong cell adhesion on Zr. UD provided the best cell adhesion for Ti.