Thermoelectric Properties of One-Pot Hydrothermally Synthesized Solution-Processable PEDOT:PSS/MWCNT Composite Materials.

The combination of organic and inorganic materials has been considered an effective solution for achieving ambient thermoelectric energy harvesting and has been developing rapidly. Here, PEDOT:PSS/MWCNT (PPM) composite hydrogels were synthesized using the self-assembled gelation process of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) and the interaction between PEDOT:PSS and multi-walled carbon nanotubes (MWCNTs) without the addition of any surfactant. After immersion in dimethyl sulfoxide and freeze-drying, the hydrogel is easily dispersed in water and used as a direct ink writing (DIW) 3D printing ink. At room temperature, the PPM-20 printed film with 20 wt% MWCNT solids achieved a maximum power factor of 7.37 μW m-1 K-2 and maintained stable thermoelectric properties during repeated bending cycles. On this basis, a thermoelectric generator (TEG) consisting of five legs was printed, which could be produced to generate an open circuit voltage of 6.4 mV and a maximum output power of 40.48 nW at a temperature gradient of 50 K, confirming its great potential for application in high-performance flexible organic/inorganic thermoelectric materials.