High-Resolution MIMO Millimeter-Wave Radar Imaging Method for Non-Cooperative Targets.

In the field of security screening imaging, millimeter-wave technology offers high imaging resolution and low radiation energy. However, it faces challenges such as difficulty in imaging non-cooperative moving targets, as well as bulky equipment and high costs. This paper proposes a high-resolution imaging method based on MIMO millimeter-wave radar. Firstly, the array model and slant range model are established, and a two-dimensional resolution scheme in range and height is constructed using a one-dimensional MIMO linear array and wideband signals. Then, the algorithm flow for MIMO millimeter-wave radar imaging is designed, and a range-domain super-resolution algorithm is introduced. This paper compensates for the phase coupling introduced by the transmitting array and target motion and successfully achieves two-dimensional imaging of non-cooperative targets based on the back-projection principle. Subsequently, the influence of array errors on the imaging results is analyzed. This method compensates for the phase coupling introduced by the transmit array and target motion and provides a theoretical analysis of array arrangement errors. Finally, the experimental results of the MIMO radar are analyzed. The final measured processing results show that the system can clearly reveal metal objects through cloth occlusion, and super-resolution processing yields sharper contours in the imaging of metal plates. Simulation analysis of imaging with array errors indicates that among the azimuth-elevation-range array position errors, the range array position error has a relatively significant impact.