Influential Factors in the Preparation of 68Ga-DOTATATE.

Acceptable and reproducible radiochemical purity (RP) for 68Ga-DOTATATE was difficult to obtain with the NETSPOT kit because the manufacturer instructions lacked details on the heater or needles used.

Methods

The drug was prepared in an International Organization for Standardization (ISO) 5 environment. Multiple dry baths and needle types were used to investigate the effects of reaction temperature and metal contamination, respectively. Temperature curves were obtained with a calibrated thermocouple. The influence of the accuracy of the NETSPOT reagent volume and its effect on outcome were investigated.

Results

The AccuBlock dry bath required recalibration for the ISO 5 environment; after calibration, the temperature was stable (only ±0.1°C from the set point). When we followed package insert recommendations (dry bath temperature set to 98°C, reaction time of 8 min), the reaction temperature was 90.6°C. When Becton Dickinson needles were used for reconstitution, 15 of 18 runs (83%) did not meet the RP specification. However, B. Braun Medical needles achieved satisfactory and stable RP. When the 68Ga generator was eluted with 5.0 mL of 0.1 M hydrochloric acid (HCl), only 3.8-3.9 mL of eluate reached the reaction vial; this volume did not impact labeling (final pH was 3.8). The labeling success rate increased markedly if the 68Ga eluate was passed through a conditioned silica gel cartridge or if no cartridge was used; then, RP was more than 99%. HCl contact with the septum of the labeling vial reduced RP.

Conclusion

The needle type and the temperature setting of the dry bath have critical roles in 68Ga-DOTATATE preparation. The AccuBlock dry bath has excellent stability and accuracy and can be used for reliable preparation. By using a conditioned silica gel cartridge or by eliminating the cartridge altogether, the RP is reliably high and stable.