Ambient Confined-Space Annealing for Crystallization Enhancement and Defect Passivation in Sb2S3 Thin-Film Solar Cells.

Annealing is a crucial step for recrystallizing Sb2S3 and forming high-quality Sb4S6 chain-like crystals, which is essential for achieving high-efficiency photovoltaic devices. However, this process currently faces a fundamental trade-off: Although high-temperature annealing enhances crystallinity, it also introduces severe sulfur and Sb2S3 molecular escape, ultimately degrading device performance. To overcome this limitation, we propose a confined-space annealing (CSA) strategy that operates via a dual mechanism. Physical confinement generates a high local vapor pressure, which suppresses Sb2S3 re-volatilization and enables recrystallization into large-grain films under atmospheric pressure. Controlled oxygen doping preferentially fills sulfur vacancy sites, suppresses interstitial Sbi defects, and promotes the self-assembly of Sb2O3 nano-belts at grain boundaries, effectively blocking leakage paths. As a result, the CSA films exhibit a 60.9% reduction in VS defects and a 40.3% improvement in carrier collection efficiency compared to pristine films. Carbon-based devices fabricated using this approach achieve a power conversion efficiency of 7.17% (VOC = 750 mV, JSC = 14.26 mA cm-2, FF = 62.7%), which is the highest reported value for Sb2S3 solar cells fabricated entirely in ambient atmosphere. This work not only offers a practical fabrication route under ambient conditions but also provides fundamental insights into defect passivation in chalcogenide photovoltaics.