Clinical evaluation of fixed partial dentures made in Sweden and China.

The aim of this study was to compare the quality of fixed partial dentures (FPDs) made in a Chinese dental laboratory with corresponding FPDs made in Swedish dental laboratories. Twenty-one patients were fitted with FPDs between March 2007 and December 2008. Single crowns and prostheses of up to seven units were made. All dentures, gold and CoCr alloys covered with ceramic, were produced in duplicate: one by a dental technician in China and the other by a dental technician in Sweden. The dentures were blind-tested with regard to marginal integrity, anatomic form and color, approximal and occlusal contacts, and time taken for adjustments. The composition of dentures was analyzed, and the material used, framework weight, compliance of the laboratories, and costs (material and labour) were recorded. There was no difference in the quality of marginal integrity, anatomic form, color, approximal and occlusal contacts, or in the time taken for adjustments. The bridge frameworks made in China were thinner and lighter (p<0.01) than those made in Sweden. Three FPDs from China showed elastic deformation when tested clinically and were considered too thin for clinical use. In 11 out of 14 orders from the Chinese laboratory, the gold alloy specified was not delivered and the cobalt-chromium alloy contained small amounts (0.19%) of nickel.The prostheses with gold-alloy frameworks from China cost 47% of those from Sweden (p<0.01) and those with cobalt/chromium frameworks 44% (p<0.01). In conclusion, the quality of the FPDs made in Sweden and China was comparable, with the exception of the dimension of the Chinese bridges, which in some cases was considered too weak. The gold alloy ordered from the Chinese laboratory was often not the alloy delivered and the CoCr alloy contained small amounts of nickel. FPDs from China cost less than half the price of those from Sweden.