Comparison of greenhouse gas emissions associated with the construction of timber, concrete, and steel check dams in Akita, Japan: An input-output analysis.

To mitigate global warming, replacing concrete and steel with timber as the primary construction material for construction projects, such as check dams, is being promoted in Japan and other countries. Timber check dams have more limited installation sites than concrete or steel dams because of installation conditions such as locations less susceptible to debris flows and locations where there is constant running water. However, even when the installation conditions are met, engineers and contractors are reluctant to select timber as a construction material because of its high construction cost. In this study, an input-output table was used to compare the greenhouse gas (GHG) emissions associated with the construction of a timber check dam at the design stage with those associated with the construction of concrete and steel check dams to quantitatively evaluate the added value of timber utilization (in addition to its construction cost). The results revealed that replacing concrete and steel check dams with timber check dams could reduce GHG emissions by 61% and 34%, respectively. This study demonstrated the possibility of evaluating the GHG emissions associated with a construction project at the design stage. Moreover, it highlights the importance of considering the GHG emissions associated with construction materials when selecting the most appropriate materials for public works projects.