Ferrocene-decorated graphene nanosheets built by edge-to-face π-π interaction for room temperature ppb-level NO sensing.

The development of materials toward ppb-level nitric oxide (NO) sensing at room temperature remains in high demand for the monitoring of respiratory inflammatory diseases. In order to find an iron-containing molecule without steric hindrance to combine with graphene for room temperature NO gas sensing, here a supramolecular assembly of ferrocene (Fc) and reduced graphene oxide (rGO) was designed and prepared for NO sensing. The assembly of Fc/rGO was characterized using FT-IR, TEM, and XPS measurements. The Fc/rGO-based sensors exhibited superior NO sensing properties at room temperature including high response (Ra/Rg = 1.73, 1 ppm), high selectivity against other exhaled gases, reliable repeatability and stability (less than 4 % decrease after 40 days). A practical limit of detection (LOD) of 200 ppb was achieved. The theoretical simulation demonstrates that ferrocene is assembled via π-π interaction with rGO in edge-to-face configuration which provides relatively lower energy than face-to-face configuration does for the whole assembly. It was first verified that the enhanced adsorption capacity and the charge transfer between NO and Fc/rGO would result in improvement of the assembly's sensitivity toward NO after ferrocene was assembled with graphene. This work provides a fresh approach of anchoring iron on graphene for gas sensing via supramolecular methods.