Superhydrophobic Coatings Prepared by the in Situ Growth of Silicone Nanofilaments on Alkali-Activated Geopolymers Surface.

As a highly hydrophobic and good environmental durable material, silicone nanofilaments have shown great advantages in the construction of superhydrophobic coatings. However, the synthesis of these materials has always been limited to the application of trifunctional organosilane monomers under the action of acidic catalysts. For the first time, long-chain polymeric hydrogenated siloxane-poly(methyl-hydrosiloxane) (PMHS) was used to synthesize rapidly silicone nanofilaments in situ under alkaline conditions. A dense silicone nanofilament coating was obtained by PMHS + geopolymer layer on a smooth iron sheet, and achieved by one-step brushing of PMHS on the surface of a just-solidified alkali-activated metakaolin-based geopolymer coating at 120 °C for an hour of sealed curing. This composite coating was followed by a superhydrophobic composite coating with a contact angle of approximately 161° and a rolling angle of 2°. Consistent with this, laser scanning confocal microscopy and field-emission scanning electron microscopy images show the presence of micro- and nanoscale features that enable the entrapment of air when exposed to water and endow excellent superhydrophobic properties. Because geopolymer material has good adhesion ability with metal, ceramic, or other materials, the composite superhydrophobic coating is expected to be widely used.